To:- All the Action Geometry Buffs

[Byeway222 at aol.com]

Hello List,
I recently posted on the subject of replacing white plastic key  coverings 
with some very good one- piece ivory tops which I can salvage  from an older  
piano.
Having thought this situation through, it is obvious that the ivory is  going 
to be thinner than the original plastic.  This is going to leave the  sharps 
looking too high.  I will, therefore , have to lower the height of  the sharps 
at the balance rail and in turn alter the depth of touch on the  sharps. The 
sharps and naturals will no longer have their original  realtionship.
My question to you all is, 'Am I getting into deep water with the action  
geometry by doing this, and am I likely to end up with a peculiar feel in the  
general touch?'
 
ric
 
 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060530/6f870956/attachment.html