Diane- off post, since it might get long, please tell me how you got to the point you trusted the placement of the pins with the impact. I've used mine for first passes, but never trusted myself with second passes......... les -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Diane Hofstetter Sent: Thursday, November 02, 2006 3:02 PM To: pianotech at ptg.org Subject: RE: Impact Hammer The impact hammers are WONDERFUL on uprights! I have never had any pain in my right shoulder, arm, or back from tuning uprights with the impact hammer, but have in my left hand/wrist/arm from pounding. It takes a bit of learning to use, especially because we tend to get dependent on knowing when the pin has turned from our body sensations, rather than just from our hearing, when we use the stationary hammer. The impact hammer learning curve is well worth it. Diane Hofstetter ----Original Message Follows---- From: "A440 Piano Service" <a440 at bresnan.net> Reply-To: Pianotech List <pianotech at ptg.org> To: "PTG List" <pianotech at ptg.org> Subject: Impact Hammer Date: Thu, 2 Nov 2006 11:24:05 -0700 I'm intrigued with an impact hammer design and am considering purchasing one to try it. Two questions: 1. Is there a model you'd recommend? (I'd consider a used one from somebody on the list if you've got one to sell -- contact me off-list) 2. Everything I read says they're wonderful on vertical pianos. I'm wondering... is there some reason they're not advisable for use on grands? John Dorr Helena, MT -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.409 / Virus Database: 268.13.23/513 - Release Date: 11/02/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.409 / Virus Database: 268.13.23/513 - Release Date: 11/02/2006
This PTG archive page provided courtesy of Moy Piano Service, LLC