Thanks, much! > The cyclone is from Clear Vue Cyclones. They have three models available: > The orginal standard size designed to fit under an eight-foot ceiling (the > one I have - 1,400 cfm), the Mini CV1400 Cyclone designed to fit under a > 7-foot ceiling (1,100 cfm), and a real small one for a shop vacuum > conversion. > http://www.clearvuecyclones.com/index.htm > > The filters are the model 9L300BL 0.5 micron woodworking filter available > from Wynne Environmental for $70. > http://www.wynnenv.com/cartridge_filters.htm > > The design is based on work done by Bell Pentz - read all about it at: > http://billpentz.com/woodworking/cyclone/Index.cfm > > Terry Farrell > > ----- Original Message ----- >> I'm sorry I missed earlier posts, but could you indicate where you got >> this beast? And also the 0.5 micron filters? >> >> Thanks, >> Mike Wagner
This PTG archive page provided courtesy of Moy Piano Service, LLC