Benefits of tilting the piano, instead of the drill press ? ( Opinions sought. )

[Ron Nossaman]

>      By placing the drill press on the floor, or
> overhead, and tilting the piano, you eliminate this
> discrepancy. As long as the bit is "plumb" to the
> floor, all the angles will be the same, regardless of
> how the base is rotated.
>      Peace,
>      G


And if you rotated the piano, the bit could be stationary 
mounted, nice and rigid.


<G>


Seriously, a little angle deviation isn't a big deal with a 
level piano and an angled drill press.
Ron N