Hi Tom, If your eyes dont water when you use it, it is not the correct CA for tuning pins ??!! <g> Joe Goss RPT Mother Goose Tools imatunr at srvinet.com www.mothergoosetools.com ----- Original Message ----- From: Tom Sivak To: pianotech Sent: Thursday, August 02, 2007 6:02 PM Subject: CA glue---all the same? List Is there any difference in the quality of various brands of CA glue? I have been using Lock-Tite Super Glue, and whereas it seems to work fine for various repairs, I have had a couple of pinblock treatments that didn't take. I used A LOT of it, too. It seems as thin a viscosity as the glue available from Schaff or the local hobby shop, so I don't think that is the problem. I've been buying it because it's available at the hardware store down the street, and I like that it comes in such small bottles. But I've noticed that my eyes don't water when I use it. Today I bought a different brand of CA from the hobby shop, and man! I had to leave the area for awhile, it was so gaseously toxic! I had initially thought that the last two pinblocks were just too far gone and that the glue couldn't make an impact. Now, I'm starting to think that the Lock-Tite glue might be weaker. Any thoughts? Thanks, Tom Sivak Chicago -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070802/32cfddb8/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC