Damper Holder for Grand Dampers

[Joe And Penny Goss]

Cool,
I espicially like the clamp idea
Joe Goss RPT
Mother Goose Tools
imatunr at srvinet.com
www.mothergoosetools.com
----- Original Message ----- 
From: "Jon Page" <jonpage at comcast.net>
To: <pianotech at ptg.org>
Sent: Saturday, August 11, 2007 9:10 AM
Subject: Damper Holder for Grand Dampers


> Remove the Let Off rail from a junk vertical and remove the eyescrews.
> 
> Drill the holes a little larger. Now you have a rack which takes up 
> little room.
> Use a pair of spring clamps to support.
> -- 
> 
> Regards,
> 
> Jon Page