Pianotek, has permagrit sanding paddles. #F100, 60 grit and 120 grit, it is 9" x 1 1/2" John M. Ross Windsor, Nova Scotia, Canada jrpiano at win.eastlink.ca ----- Original Message ----- From: george ivey To: pianotech at ptg.org Sent: Tuesday, August 14, 2007 7:09 PM Subject: hammer reshaping Does anyone know where I can get the perma-grit thin file mostly used in reshaping hammer s? I was told that it was available from D.G. Products out of san antonio but no listing on the web. This file is very thin, flat and retangular , 1 1/2 inches wide and about 9 inches long. It has 80 grit on one side and 120 grit on the other. Sometimes available at the conventions but I am looking for one now... if you know where I can order one, I will be grateful. Thanks.. George Ivey gaiveytx at yahoo.com Associate member Houston PTG -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070814/62c88ba3/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC