Who is Kim Bunker?

[Farrell]

And of course, when installing a new pinblock: "The fit must be exact, and the holes drilled evenly at just the right angle 7 degrees to insure an even, tight pin throughout."

Interesting.

Terry Farrell
  ----- Original Message ----- 

  In a message dated 8/18/2007 10:59:11 PM Pacific Daylight Time, paulrevenkojones at aol.com writes:
    Have run across a website for this fellow, http://www.playerpiano.com/, in which he says, "The PTG (Piano Technicians Guild) now is making recommendations to the tuners in the field to apply cyanoacrylate glue (Krazy Glue) to the pin block to help tighten the loose Pins." He goes on to say, "WE RECOMMEND NEVER TO DO THIS BASTARDIZATION TO YOUR PIANO (IT WILL DESTROY THE PIN BLOCK!)." 
  The site name is actually www.playerpianos.com (pianos plural). He also recommends against installing new soundboards in favor of re-crowning and shimming. 

  Bob Davis





------------------------------------------------------------------------------
  Get a sneak peek of the all-new AOL.com.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070819/33c6dc46/attachment-0001.html