David, And where did you get it? Any place in the US have it? Avery Todd On 8/26/07, David Boyce <David at piano.plus.com> wrote: > > I bought a new toolcase a few months ago and am delighted with it. My old > black ABS "Engineers toolcase" from RS Components (a UK electronics supply > company) was falling apart with age. I was never all that enamoured of it, > as the elastic didn't hold tools firmly in place. In the end, it got a > hole > of increasing size in one corner and tools were droping out! > > For ages I looked around to find something reasonable. I bought a cheap > aluminium toolcase and a tool roll that I used for a while, but didn't > like > it. Then online I found a company selling cases at reasonable prices, > including this one in (bright!) orage, on special sale offer at £79 ($158) > including delivery. > > It's proving to be just the thing! Nice design, with rubber feet on both > the base and the bottom edge. Metal reinforced corners. It holds fine > regulating tools firmly in place in the elastic straps on the tray, and > the > tray can be locked in place on the base inset by little buckles. I carry > my > Fujan lever in it too, not shown, wrapped carefully in a cloth. > > Of course, I also have other cases and holders for action parts, > adhesives, > felts, wire, etc! > > Best regards, > > David. > > -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070826/a4acfdcb/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC