Re: Mason and Hamlin A,circa 1909: What to do with loose tuning pins inbass...That's my question also. I'll also add - why? Tom? Terry Farrell ----- Original Message ----- How do you keep tension on the strings as you're spinning them out? David Ilvedson, RPT Pacifica, CA 94044 ------------------------------------------------------------------------------ Original message From: bunkyaol Obviously pin block, remove strings by keeping tension on them as you spin them out...ca & pin block restorer and metal sleeves, oversize all the bass pins, re install and tune, remove original bend....you've got a pin block to replace but this may give you a few years, maybe not if it's delamed or split, good luck. tom mc -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20071229/964b8f0e/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC