On Dec 31, 2007 11:50 AM, Gary Fluke <gary.fluke at verizon.net> wrote: > I have a Mason and Hamlin console from 1957. The walnut finish could > stand to be done over again. These pianos were also available in an ebony > finish when new. How would one apply an ebony finish to my piano? > > > Gary Fluke > Snohomish, WA > Walnut is a nice looking wood even by todays standards, when refinished right. The work it would take to re-do it in ebony would certainly be as much if not more as redoing it in it's "original" color. Everyone isn't looking for Oak or Cherry there are those who still believe that classic woods like walnut, pecan, even black walnut and other less used woods today are still classics. A friend who used to, every so often, get a blonde beater from a school or church, would redo them in ebony simply because no one wanted blonde pianos. Stripping a blonde piano to the point where it will accept a decent stain is usually more trouble than it is worth because they have so much filler in them. He would use bondo to fill the nicks and gouges, coat it with a primer then several coats of black lacquer and 3 or 4 coats of clearcoat. Mike -- The secret to creativity is knowing how to hide your sources. Michael Magness Magness Piano Service 608-786-4404 www.IFixPianos.com email mike at ifixpianos.com -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20071231/48031cde/attachment-0001.html
This PTG archive page provided courtesy of Moy Piano Service, LLC