Good concept to explain the creeping aspect of this problem. Not the right answer in this case, but it is along those lines. Alan E. -----Original Message----- From: jrpiano at win.eastlink.ca To: tune4u at earthlink.net; pianotech at ptg.org Sent: Tue, 16 Jan 2007 1:46 PM Subject: Re: puzzler: vertical damper pedal problem How about the pedal securing screws stripped, and the pedal is just loosening, bit by bit, after, you take out the lost motion, with the adjust. John M. Ross Windsor, Nova Scotia, Canada jrpiano at win.eastlink.ca ----- Original Message ----- From: "Alan R. Barnard" <tune4u at earthlink.net> To: <pianotech at ptg.org> Sent: Tuesday, January 16, 2007 5:04 PM Subject: RE: puzzler: vertical damper pedal problem > 1. Mice (or roaches) eating felt punching or pedal prop bushings broken or > missing or excessively worn > 2. Pedal trap spring not keeping enough tension on the adjusting nut to > keep it from slipping (spring weak, broken, or dislocated) > 3. Broken damper rod hangers or related parts > 4. Split or broken wooden trapwork piece > 5. Felt missing between bass-only and full-damper arms of a center-push > system > 6. Broken or bent pedal, pedal bracket, or pedal prop > 7. Bunged up threads on pedal prop or nut > 8. Pedal bracket pivots or bushings worn or damaged > 9. Foreign object preventing full depression of the pedal or movement of > the trapwork movement or upper damper assembly > 10. Player has wimpy leg muscles > 11. Player is overly sensitive to normal damper ring > 12. Player is lonely, whiney, and/or has the hots for the tuner > > Alan Barnard > Salem, MO > Joshua 24:15 > > > > ----- Original message ---------------------------------------- > From: reggaepass at aol.com > To: pianotech at ptg.org > Received: 01/16/2007 2:18:51 PM > Subject: puzzler: vertical damper pedal problem > > >>List, > >>Went to tune a Sohmer console (although the problem in question was not >>necessarily specific to this make). Client complained that the damper >>pedal wasnâ?Tt working well. Dampers were coming off the strings when >>the pedal was fully depressed, but just barely. I turned down the nut >>on the threaded rod attached to the pedal to time the lift sooner. Not >>enough time on that visit to determine why it had gone out of >>adjustment (assuming it had ever been IN adjustment). Problem >>solvedâ?¦.until several months later when the client called that the >>damper pedal was again not working, making playing her piano a >>â?ohatefulâ? experience. Well, we canâ?Tt have that, said I, so off I >>went >>to get to the bottom if this problem. Turned out to be something I >>hadnâ?Tt seen before. Can you guess what it was? > >>Cheers, > >>Alan Eder > > > >>___________________________________________________________________ >>_____ >>Check out the new AOL. Most comprehensive set of free safety and >>security tools, free access to millions of high-quality videos from >>across the web, free AOL Mail and more. > > > >>-- >>No virus found in this incoming message. >>Checked by AVG Free Edition. >>Version: 7.5.432 / Virus Database: 268.16.9/622 - Release Date: 1/10/2007 >>2:52 >>PM > ________________________________________________________________________ Check out the new AOL. Most comprehensive set of free safety and security tools, free access to millions of high-quality videos from across the web, free AOL Mail and more.
This PTG archive page provided courtesy of Moy Piano Service, LLC