That's all great as long as you have the driver to do the work....!!!! ;-} David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: "alan forsyth" <alan at forsythalan.wanadoo.co.uk> To: "Pianotech List" <pianotech at ptg.org> Received: 1/20/2007 4:36:35 PM Subject: Re: square drive screws. >About 5 years ago I came across an action where all the action screws had >Robertson type heads. Really great to work with. Can't remember what piano >but it may have been a Hopkinson which were a heavy duty type piano meant >for school abuse and which would be overhauled several times in it's >lifetime. >AF >----- Original Message ----- >From: "David Renaud" <drjazzca at yahoo.ca> >To: "Pianotech" <pianotech at ptg.org> >Sent: Saturday, January 20, 2007 11:34 PM >Subject: Re: square drive screws. >> >> >> Needing a Large Robertson driver immediately I took >> a tuning pin to a grinder making 4 nice flat surfaces >> of one end. In vise grips the square became a great >> large Robertson screwdriver. Takes 5 min to make, and >> cost nothing but and old tuning pin. >> >> Cheers >> Dave Renaud >> >> >> >> >> >> >> __________________________________________________ >> Do You Yahoo!? >> Tired of spam? Yahoo! Mail has the best spam protection around >> http://mail.yahoo.com >> >>
This PTG archive page provided courtesy of Moy Piano Service, LLC