| -----Original Message----- | From: pianotech-bounces at ptg.org | [mailto:pianotech-bounces at ptg.org] On Behalf Of Ron Nossaman | Sent: January 24, 2007 6:23 PM | To: Pianotech List | Subject: Re: Cleaning epoxy off soundboard joint --- was glues | | | > I'm looking for the easy | > answer..Stuffs like steel. I suppose I could just leave the epoxy | > which is flat a smooth & glue the new board back in with | epoxy but I don't like this idea because of what I'm currently dealing | with. My admonition to other bellyheads is, that epoxy isn't | necessary to keep a sound board ....which is wood to stay glued to a rim....also | > wood......JMO/* */ suggestions?/* */ Dale/* | | | Propane torch, scrape hot. | Ron N Yup. Been there, done that. Del
This PTG archive page provided courtesy of Moy Piano Service, LLC