Thanks Ed, Makes sense. I'll pay better attention in the future (and save myself the anxiety). ;-] William R. Monroe > > Greetings, > Most large pieces of bushing cloth will have a cut edge and a torn > edge. If you examine it carefully, you will see which side should be > torn. > What happened here is that you began tearing on the cut side and the cut > didn't > follow the warp,(or woof) of the fabric. You can tear that odd shaped > piece > into thinner strips, leaving only one small triangular shaped edge if you > tear > it again, starting 9mm from the previously torn edge you did. > Regards, > Ed Foote RPT
This PTG archive page provided courtesy of Moy Piano Service, LLC