Doug, Lower the capstan. Greg -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Doug Renz Sent: Monday, November 19, 2007 9:42 PM To: pianotech Subject: Jack question for old piano I am starting to get more involved with minor repairs on actions for customers and tonight I installed a jack for an old upright piano, and when I set the jack in the action, the hammer was not resting in the same place as the other hammers, how can I regulate or adjust this hammer when the jack length is slightly longer than the other? It sounds ok, maybe a little quieter because of the decreased blow distance. Thanks for the advice to a new tuner starting to do repairs. Doug
This PTG archive page provided courtesy of Moy Piano Service, LLC