At 22:45 +0000 20/11/07, John Delacour wrote: >The difference between 23mm centre to rail-midpoint on the old >flange and 24mm on later flanges can be allowed for by packing the >top of the lever flange, as has been discussed... ...but for those whose English is not very good, here is a picture. The tiny red circle is the point about which the flange rotates and the arrow shows where the addition of a strip of card less than 1/2mm in thickness will move the jack about 1mm inboard. -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20071121/8146fc07/attachment-0001.html -------------- next part -------------- A non-text attachment was scrubbed... Name: P480031A0.png Type: image/png Size: 36778 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20071121/8146fc07/attachment-0001.png
This PTG archive page provided courtesy of Moy Piano Service, LLC