Glue for laminated rib construction

[Tony Caught]

Two glues come to mind. One is a Weldbond gap filling sandable fast tack glue and the other is (Australian Brand ?) Selleys Aquadhere durabond polyurethane type glue.
The later is new technology. Dampen one surface to activate glue, clamp for 4 hours for curing.

Tony Caught
Australia
0427 850 737
acaught at internode.on.net

  ----- Original Message ----- 
  From: Erwinspiano at aol.com 
  To: pianotech at ptg.org 
  Sent: Thursday, October 11, 2007 2:32 PM
  Subject: Glue for laminated rib construction


    Belly heads
    I've been gluing up my own laminated rib stock & my pinblocks.  I  won't use epoxy because it too is toxic to my body & expensive.  I'm open for suggestions.  
     I need to glue up a bunch of ribs  tomorrow.  I like th Bolduc for my pinblocks & bridge cap applications because it doesn't clog drill bits or have adverse affects on tuning torque.  I believe Andre usu to glue up his own blocks & panels.
    Any help?
    Thanks
    Dale





------------------------------------------------------------------------------
  See what's new at AOL.com and Make AOL Your Homepage.


------------------------------------------------------------------------------


  No virus found in this incoming message.
  Checked by AVG Free Edition. 
  Version: 7.5.488 / Virus Database: 269.14.7/1062 - Release Date: 10/10/2007 5:11 PM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20071011/3527f50d/attachment.html