October Journal--in the Tips, Tools & Techniques section. br ----- Original Message ----- From: Michael Magness To: Pianotech List Sent: Monday, October 22, 2007 5:38 PM Subject: Re: Help... On 10/22/07, Jon Page <jonpage at comcast.net> wrote: no hidden screws etc. Seem to be a spring loaded pivot but I was unable to removed the fall. Any suggestions? Look at the sides of the fallboard, there are rails screwed to the sides, the topic is also in the Journal. -- Regards, Jon Page Him If this is like the Wheelock I worked on(mangled) getting the fallboard off, I believe you tilt the fall to about a 45 degree angle and pull it toward you and it slides off of those spring loaded pivots. I can't find the correct Journal w/the description in it but if memory srves that's the way it works. Mike -- Learn from yesterday, live for today, hope for tomorrow. The important thing is to not stop questioning.-- Albert Einstein Michael Magness Magness Piano Service 608-786-4404 www.IFixPianos.com email mike at ifixpianos.com -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20071022/a0415b6b/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC