Lehr piano

[Joe And Penny Goss]

Hi Ed,
Just tuned a Kimball grand with the same set up.
Joe Goss RPT
Mother Goose Tools
imatunr at srvinet.com
www.mothergoosetools.com
  ----- Original Message ----- 
  From: Ed Carwithen 
  To: Piano Tech List 
  Sent: Thursday, October 25, 2007 1:27 PM
  Subject: Lehr piano


  Dear List:

  I am preparing to work on a Lehr piano.  The only numbers I can find (and these are on the piano in several places) are 1396.  In the piano atlas the serial numbers go from 18000 to 56000.  There should be a serial number that matches the atlas somewhere.  Does anyone have a clue as to where that might be?

  For those who might run into this some time:  While trying to get a look inside the piano I had trouble figuring out how to take it apart to get at the action.  Finally I discovered that the moulding at the front/top of the piano over the key cover could be unscrewed from the forward part of the plate on the inside.  That revealed the screws holding the key cover assembly, which uncovered the screw holding the cheek blocks.  Knowing this might help keep someone else from wasting time searching for a way into the piano's insides.

  Ed Carwithen
  John Day, OR


  __________________________________________________
  Do You Yahoo!?
  Tired of spam? Yahoo! Mail has the best spam protection around 
  http://mail.yahoo.com 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20071025/c67ceee2/attachment-0001.html