Yes. I'll try PianoTek and Jurgen ( maybe even Schaff, too. ) Thanks! G --- Erwinspiano at aol.com wrote: > > Let Piano tech know. Perhaps they will stock them. > Dale > > The supply house plates don't fit a lot of pianos > I see. The big round notch at the bottom rides too > high over the stud, so when you tighten them they > twist sideways, and the top edge rubs on the inside > of > the butt. > I spoke with saintly genius machinist Robert > Streicher, yesterday ( who's made parts for Ampicos > and Steinways for decades- you've probably bought > some > ) and he said he'd make me proper ones: with a > small > square notch that fits the W,N& G action I'm > working > on. ( He made 75,000 plates for Steinway damper > levers, for APSCO, so he can probably handle this. ) > I'd like to make it "worth his while", and also > of benefit to other techs, so please let me know if > you'd like a set. ( I'll keep a list. ) > > > > > > > > ************************************** See what's > new at http://www.aol.com > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
This PTG archive page provided courtesy of Moy Piano Service, LLC