REcapping the bridge

[Fenton Murray]

Might there be drilling issues? I think there are at 6-800 rpm or so, 
probably not with high speed air tools.
Fenton
----- Original Message ----- 
From: "Farrell" <mfarrel2 at tampabay.rr.com>
To: "Pianotech List" <pianotech at ptg.org>
Sent: Monday, August 04, 2008 1:44 PM
Subject: Re: REcapping the bridge


> Yet another fabulous application for epoxy! I use West System epoxy 
> thickened with their high-strength adhesive filler and their two step 
> bonding method. But hey, I'm using epoxy-laminated hard-maple caps also.
>
> Terry Farrell
>
> ----- Original Message ----- 
>>> To continue this superb thread on bridge work where the bridge remains
>>> on the panel, and the panel remains inside the rim:  what are our
>>> esteemed readers preferred methods for gluing on the new cap?
>>> Will Truitt
>
>
>
>