I would think it to be much easier to just cut a new rail and drill away..... Terry Farrell ----- Original Message ----- >I tried to plug and re-drill a guide rail recently and had some real >problems as I redrilled the plug and had the paper thin walls of my plugs >come apart. So that you might have better success, here are my methods that >did not work. I used poplar and tight bond. If I were to do this again ( I >won't because it's so easy to make a new cap for a guide rail) I would use >maple plugs, I would be very careful in my drilling to create a nicely >machined hole with out splitting the rail, and I would use epoxy. Hope this >can help you avoid repeating my mistakes. > Fenton
This PTG archive page provided courtesy of Moy Piano Service, LLC