Andrew, Now that you've told us you had a technique (procedure), is there any chance you will share it with us??? I sure hope you will. Marcel Carey Sherbrooke, QC > From: anrebe at sbcglobal.net> To: pianotech at ptg.org> Subject: Re: Cutting rib radii> Date: Wed, 6 Aug 2008 15:59:32 -0500> > David,> I have a technique I learned to use while a timberframer. I haven't > cut any soundboard ribs yet but have done plenty of curves & > scrollwork in timbers.> > Andrew Anderson> > On Aug 6, 2008, at 10:30 AM, David Love wrote:> > > Can anyone show me their jig set up for cutting various radii in > > ribs and of> > various lengths? I've been using laminated ribs which are bent to the> > proper radius but would like to know the system for accurately > > setting up> > and cutting various radii.> >> > Thanks in advance.> >> >> > David Love> > davidlovepianos at comcast.net> > www.davidlovepianos.com> >> >> _________________________________________________________________ -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080806/52ab08bb/attachment-0001.html
This PTG archive page provided courtesy of Moy Piano Service, LLC