Center Pin

[David Ilvedson]

I apologize to Scott...that is Matthew I'm writing to....;-[

David Ilvedson, RPT
Pacifica, CA  94044

----- Original message ----------------------------------------
From: "Matthew Todd" <toddpianoworks at att.net>
To: "Pianotech List" <pianotech at ptg.org>
Received: 8/16/2008 8:06:06 PM
Subject: RE: Center Pin


>Speaking of this, does anyone have any idea why Schaff packs their center pin 
>cases so full, so when you need one, 15 come out, and it's almost impossible to get 
>them back in!

>Scott Jackson <ScottWayneJackson at hotmail.com> wrote:  Another beautiful 
>presentation John. Thank you.

>Scott Jackson
>Mt Keira, NSW, Australia. 


>-----Original Message-----

>With the nippers. I have done hundreds of thosands of centres and 
>never needed anything else.

>I have published a rough guide here:



>it should be possible to repin a set of 88 centres in less than 90 
>minutes including set-up time.

>JD






>TODD PIANO WORKS 
>Matthew Todd, Piano Technician 
>(979) 248-9578
>  http://www.toddpianoworks.com