I meant cut the threaded portion off. :-( On 18-Aug-08, at 3:37 PM, John Ross wrote: > I am trying to find a replacement for the things that are in the > pedal linkage that look like bolts with no thread, and are held in > place with a collar with a set screw. > I thought it would be easy, just get a bolt and cut the head off. > It measures about .25". > A 1/4" bolt is too small, and the next size up is too big. > I found one that I had got from PPC years ago, but it is too small, > and uses fiber tubes to build out the size. > Any ideas would be appreciated. > The other thing is the holes they go into are elongated. It is a > soft metal. Would JB Weld be the thing to use to fill it, and re- > drill to size? > John Ross > Windsor, Nova Scotia, Canada > > > > > John Ross Windsor, Nova Scotia, Canada
This PTG archive page provided courtesy of Moy Piano Service, LLC