> I'm doing RC&S boards...5% is not in my repertoire. For downbearing measurement, > I'm shooting for around 7-7.5%mc. Both yourself and Ron seem to be saying the > crown of an RC&S board is not variable at different mc's. I'm chicken and will > have to prove that to myself before I trust it. The crown will vary depending on panel compression. A board ribbed at 5% will crown more than one ribbed at 6% when you're setting bearing at 7%. The stiff rib set and low panel compression of an RC&S board will vary much less in unloaded crown than a CC or RC hybrid. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC