[CAUT] hammer thickness trimming jig

[Greg Newell]

I put each of the bass hammers on the 1" belt sander. That seems to have
worked for the problem bass area. That may be enough. Still, I thought I
remembered seeing a jig with 2 spring loaded arms that held down the hammers
and still allowed for the shank being attached. I guess that's a search for
another day. Thanks to everyone!

Greg Newell
Greg's Piano Forté
www.gregspianoforte.com
216-226-3791 (office)
216-470-8634 (mobile)


-----Original Message-----
From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of Ron Nossaman
Sent: Sunday, August 24, 2008 1:20 PM
To: College and University Technicians
Cc: 'Pianotech List'
Subject: Re: [CAUT] hammer thickness trimming jig


Hi Greg,

<snip>

Let us know what works for you.
Ron N