[pianotech] Steinway under lever tray

[erwinspiano at aol.com]

 Paul
 I beleive all underlever trays for s,m,o are the same up to the teflon era. Do you have any old trays from those models even back as far as 1900. The trays didn't change much if at all. If you ahve an old one... CHeck that dimension. I'll look in an hour or so & see what I have on the shelf.
  Dale


-----Original Message-----
From: Paul Chick <tune4u at fmwildblue.com>
To: Pianotech at Ptg.Org <pianotech at ptg.org>
Sent: Fri, 12 Dec 2008 6:10 am
Subject: [pianotech] Steinway under lever tray




Is there anyone on the list with a 1940’s Steinway L in their shop.  I need the dimension of the under lever tray measured from the flange rail to the front edge.  Please include the thickness of the tray.  I’m replacing the back action and cut the tray too narrow.  I took the dimensions from the original, not knowing the front piece was missing.  This is the grand that was in a flood, and there are a lot of little details missing e.g. all of the felt in the action was  gone.  The piano is about 95% finished, coming together very well.  

Thanks to all who respond.

Paul C


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20081212/81c7c9c9/attachment.html>