You need mute all the bass strings as a test also... David Ilvedson, RPT Pacifica, CA 94044 Original message From: "John Formsma" To: pianotech at ptg.org Received: 12/13/2008 7:14:09 PM Subject: Re: [pianotech] (no subject) Check the bass dampers. One is probably not doing it's job. -- JF On Sat, Dec 13, 2008 at 8:18 PM, Caitriona Ireland <catrionna2001 at yahoo.com> wrote: Hi All; Having a ringing problem with 1909/10 production run of a Connway Co. Boston upright when playing F2, that is same as F23 counting bass A as A1, the ringing occurs in the sporano section of the piano near the middle section of the soprano. I have muted all of the soprano with felt and mutes but still their is ringing, hmm, don't know the solution to this, have checked string by tuning pins to see if they touch/rub together, have checked seating of string coils on tuning pins. Would love some ideas with this, anyone out their in all this sudden cold weather, 10 below her Western Montana. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20081213/170f1459/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC