Scott, Yup! That's the one. Elegantly simple. Bob Russell Sr. made it. I obtained it decades ago. Greg Newell Greg's Piano Forté www.gregspianoforte.com 216-226-3791 (office) 216-470-8634 (mobile) -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Scott Jackson Sent: Tuesday, February 12, 2008 5:42 PM To: Pianotech List Subject: Re: hitch pin loop tool Sorry Greg. I've sent the picture to http://www.ptg.org/files.php I could not find this picture in the archives when i went looking. Is this yours? Scott Jackson ----- Original Message ----- From: "Greg Newell" <gnewell at ameritech.net> To: "'Pianotech List'" <pianotech at ptg.org> Sent: Wednesday, February 13, 2008 4:33 AM Subject: RE: hitch pin loop tool > Scott and list, > Yes, I did post this some time ago but I couldn't open any attachment to > verify. I suppose I could post a picture again but I think the others that > were posted a short time ago will suffice. I you need it again just ask. > > Greg Newell > Greg's Piano Forté > www.gregspianoforte.com > 216-226-3791 (office) > 216-470-8634 (mobile)
This PTG archive page provided courtesy of Moy Piano Service, LLC