Thank you David. Joe Goss RPT Mother Goose Tools imatunr at srvinet.com www.mothergoosetools.com ----- Original Message ----- From: "Porritt, David" <dporritt at mail.smu.edu> To: "Pianotech List" <pianotech at ptg.org> Sent: Wednesday, February 13, 2008 11:26 AM Subject: RE: Baldwin hitch > 0.230" on the L we have here. > > David M. Porritt, RPT > dporritt at smu.edu > > > -----Original Message----- > From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On > Behalf Of Joe And Penny Goss > Sent: Wednesday, February 13, 2008 12:09 PM > To: Pianotech > Subject: Baldwin hitch > > Hi Any one know the .000 inch diameter measurment of the Baldwin > accuajust > hitch pin? > Joe Goss RPT > Mother Goose Tools > imatunr at srvinet.com > www.mothergoosetools.com > >
This PTG archive page provided courtesy of Moy Piano Service, LLC