> What regulation would you do in one hour, using only one tool? A screw driver. Align parts and tighten flange screws. Other adjustments may exacerbate the situation with other adjustments and then your hour's up with the action not shining a good light upon you. Second would be a spring hook which can also be used to adjust Let Off. Third, If there is excessive lost motion and the springs are weak, a capstan wrench to reduce lost motion and keep the shanks resting on the rest. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080217/5a1d3f86/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC