Don: 60% RH at what temp? Thats when the problem occures. Gerald ----- Original Message ----- From: "Don" <pianotuna at accesscomm.ca> To: "Pianotech List" <pianotech at ptg.org> Sent: Monday, February 18, 2008 4:18 PM Subject: Re: rusted piano strings > Hi Gerald, > > An instrument unfortunately doesn't need to be below the dew point (though > that may well start rust up quickly). All it takes is 60% RH for it to > "get > going". Once rust starts the best one can hope for is to "slow it down". > > At 04:06 PM 2/18/2008 -0600, you wrote: >>It's been my experience that the reason that strings form rust is because >>of >>condensate that form on them when the atmospheric condition is correct for >>such an occasion. I think that occurrence is called dew-point. Dose that >>make sense? >>Gerald McC > Regards, > Don Rose, B.Mus., A.M.U.S., A.MUS., R.P.T. > Non calor sed umor est qui nobis incommodat > > mailto:pianotuna at yahoo.com http://us.geocities.com/drpt1948/ > > 3004 Grant Rd. REGINA, SK, S4S 5G7 > 306-539-0716 or 1-888-29t-uner
This PTG archive page provided courtesy of Moy Piano Service, LLC