Jurgen at Pianoforte Supply has got the real one of those...the good one from Germany...great tool. www.pianofortesupply.com DA On Feb 20, 2008, at 4:30 PM, Kent Swafford wrote: > Same tool. With some difficulty I was able to narrow the blade > inside the barrel so it would fit the tiny drop screw slots. I > suppose it's possible that Pianotek later started making the tool > with a properly narrowed blade -- hope so. > > Kent > > > > On Feb 20, 2008, at 6:18 PM, Alan Barnard wrote: > >> Nice thumb shot, Kent! >> >> This is the tool I have >> <1.jpg> >> >> Is it the same one? Mine has a slotted end and a driver end, both >> with "shields" around them to keep the tool from slipping off the >> screw. But the collars, or shields, don't seem quite as fat, >> proportionally, as the one in your picture. Anyway, I don't quite >> understand what you did to modify yours, based on the picture. >> Some beveling? >> >> Alan Barnard >> Salem, MO >> >> >
This PTG archive page provided courtesy of Moy Piano Service, LLC