Greetings All -- I made the mistake of thinking the other day, and I started wondering why piano strings are terminated at the bridge on both the X and Y axis but at the capo bar, or agraffe, on only the X, (or perhaps that's Y depending on how you are looking at it), axis. We go to lengths to make sure the strings are seated properly at the bridge so that there is a definite and precise termination in both planes at the bridge and bridge pin. Why then is the lack of termination in both planes not a problem at the agraffe and capo bar end? -- Geoff Sykes, Los Angeles -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080113/3c61319b/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC