What he said! Alan Eder -----Original Message----- From: Paul T Williams <pwilliams4 at unlnotes.unl.edu> To: Pianotech List <pianotech at ptg.org> Sent: Tue, 3 Jun 2008 5:40 am Subject: Re: Double-striking hammers Hi Ted, The more I regulate, the less I do on the bench. ?I just find that i end up re-doing many things when the action is back in the piano. ?Nowadays, I only do a rough-in job on the bench, plus the usual filing hammers, travelling shanks, cleaning, tightening screws, repairs, etc. ?Try to save the fine adjustments for the piano itself. Remember to start with bedding the keyframe! Hope this helps. Paul -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080603/b26a3873/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC