>I think that's fine. I just don't want the pin to extend down below the >bottom of the original pin. If you look down inside the hole you can see a >small shelf where the original pin stopped. Forcing a longer pin (and >larger) pin into that shelf can create a situation where the pin is >extremely tight at the very bottom of the hole and that can make for poor >rendering. Sorting the pins as you mention I think is a good idea. Reaming the hole removes the 'new' section of the hole. It can be tricky that tight to the case. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080617/a61c37a1/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC