List members: A client wants the original leather buttons installed on his ebony grand. They are glued into a specially shaped hole in the lid, etc. Wasn't there an article in the PTJ about how to make/replace these bumpers. Some of them were lost in the veneer repair stages. I usually fill the old holes and use a stem bumper that's available through supply houses. But he wants to stay as original as possible. Right now, all I have is modified spade bits for the convex and concave profiles to form the holes. Paul C -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080624/6d138cb9/attachment-0001.html
This PTG archive page provided courtesy of Moy Piano Service, LLC