Greetings all: I recently encountered, for the first time ever, a SS- D where the cross strut (my term here) had been removed. The strut I am referring to is the one that connects from the bass/tenor break over to the treble hitch pin and support bolt area. It is plate steel and usually has STEINWAY raised cast onto the metal. It connects to the plate with machine screws. Initial findings and observations: The 2 machine screws were still screwed into the plate. Pitch was at 440. Noticable lack of sustain in treble and high treble. Plate had no structural issues (yet) I am uncertain who what or when this was done but my best guess is that it was forgotten during a restringing. All comments and opinions as to the good bad or indifferent of this issue are appreciated. I do have a plan of action but wanted to field this one to the list first. Cordially, Gerry Cousins, RPT cousins_gerry at msn.com -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080626/cb6216d2/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC