Kat... Also consider hammer filing before you voice...a nice smooth surface is a good starting point... David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: KeyKat88 at aol.com To: pianotech at ptg.org Received: 5/4/2008 3:32:40 PM Subject: Voicing Help >Greetings, > > I usually shallow needle my Yami's U3 hammers after tuning to take >off the "glassy" edge. However, after 10+ years of playing on this piano >(This is my personal piano), sugar-coating ain't cutting it anymore. The hammers >sound ear-piercing. I side needled the area just in front of the wood core, >but this only alleviated the ear piercing sound a little. These hammers were >packed hard too! Is Yamaha hammer quality the problem? What am I doing >wrong? ...or aren't I needling enough? > >Thanks >Julia Gottshall >Reading, PA >**************Wondering what's for Dinner Tonight? Get new twists on family >favorites at AOL Food. >(http://food.aol.com/dinner-tonight?NCID=aolfod00030000000001)
This PTG archive page provided courtesy of Moy Piano Service, LLC