replacing a back action on a 1909 Steinway B

[Jude Reveley/Absolute Piano]

Jon,

Just make new blocks. I've generally found the flange center to be 
dangerously close to the edge of the pivot blocks anyway. FWIW.

Jude Reveley, RPT
Absolute Piano Restoration, LLC
Lowell, Massachusetts
(978) 323-4545

----- Original Message ----- 
From: "Jon Page" <jonpage at comcast.net>
To: <pianotech at ptg.org>
Sent: Monday, May 12, 2008 8:31 AM
Subject: replacing a back action on a 1909 Steinway B


>I forgot to mention that on back actions which are not being replaced
> during the damper restoration process, I move the pivot elevation if
> needed and put it in line with the flange centers if the end blocks allow.
> -- 
>
> Regards,
>
> Jon Page
>
>