Which name should we know you as, Katrina Ireland or Annalee Smith? You've used both.
Debbie L.
----- Original Message -----
From: Caitriona Ireland
To: pianotech at ptg.org
Sent: Friday, November 14, 2008 2:24 PM
Subject: Re: [pianotech] pianotech Digest, Vol 1, Issue 34
To all;
Love all your brainstorms on PT acronym meaning I would have never thought all those up myself, thanks for all the humor, smile, and all the nudges.
Kindly
Annalee Smith, Piano Tech
I am not registered as an RPT with PTG, has but have worked as one with my family, following tradion there.
------------------------------------------------------------------------------
From: "pianotech-request at ptg.org" <pianotech-request at ptg.org>
To: pianotech at ptg.org
Sent: Thursday, November 13, 2008 8:40:09 PM
Subject: pianotech Digest, Vol 1, Issue 34
Send pianotech mailing list submissions to
pianotech at ptg.org
To subscribe or unsubscribe via the World Wide Web, visit
http://ptg.org/mailman/listinfo/pianotech_ptg.org
or, via email, send a message with subject or body 'help' to
pianotech-request at ptg.org
You can reach the person managing the list at
pianotech-owner at ptg.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of pianotech digest..."
Today's Topics:
1. yamaha C3 pin block removal (Larry Fisher RPT)
2. Re: lubricants (Joe And Penny Goss)
3. Re: yamaha C3 pin block removal (Mike Spalding)
4. Re: yamaha C3 pin block removal (Jon Page)
5. lubricants (Zeno Wood)
6. Re: lubricants (Ron Nossaman)
7. Re: lubricants (Tom Driscoll)
8. Young Chang brackets (MICHAEL MEZHINSKY)
9. Re: lubricants (Ron Nossaman)
10. Re: lubricants (David Andersen)
----------------------------------------------------------------------
Message: 1
Date: Thu, 13 Nov 2008 14:51:44 -0800
From: "Larry Fisher RPT" <larryf at pacifier.com>
Subject: [pianotech] yamaha C3 pin block removal
To: <pianotech at ptg.org>
Message-ID: <780228ABE6CA4817AF98D1805F154735 at DF3VV191>
Content-Type: text/plain; charset="iso-8859-1"
I have a 1968 C3 in my shop that needs a new pinblock. After pulling the
plate, I found the pinblock to be securely attached to the rim.
Does this puppy need to be cut out of there with a sawzall?? Any
experienced people out there on this model??
Larry Fisher RPT
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20081113/f110cc91/attachment-0001.html>
------------------------------
Message: 2
Date: Thu, 13 Nov 2008 16:11:56 -0700
From: "Joe And Penny Goss" <imatunr at srvinet.com>
Subject: Re: [pianotech] lubricants
To: <pianotech at ptg.org>
Message-ID: <035601c945e5$39bbb500$bdfb64d0 at setup00>
Content-Type: text/plain; charset="iso-8859-1"
PT Part Time ??
Joe Goss RPT
Mother Goose Tools
imatunr at srvinet.com
www.mothergoosetools.com
Also, what does pt stand for? An acronym (spelling anyone?) can only be put at the end of your name if your an RPT! If you're not an RPT, go get your upgrade to RPT. There's plenty of ways to go get tested!! Do it this year. The costs are going way up next year! :>)
I hope this helps!
Best of luck!
Caitriona Ireland <catrionna2001 at yahoo.com>
Sent by: pianotech-bounces at ptg.org
11/13/2008 01:32 PM Please respond to
pianotech at ptg.org
To pianotech at ptg.org
Caitriona Ireland <catrionna2001 at yahoo.com>
Sent by: pianotech-bounces at ptg.org
11/13/2008 01:32 PM Please respond to
pianotech at ptg.org
cc
Subject Re: [pianotech] lubricants
Sincerely
Annalee Smith, PT
Katrina
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20081113/16832552/attachment-0001.html>
------------------------------
Message: 3
Date: Thu, 13 Nov 2008 17:12:38 -0600
From: Mike Spalding <mike.spalding1 at verizon.net>
Subject: Re: [pianotech] yamaha C3 pin block removal
To: pianotech at ptg.org
Message-ID: <491CB466.6010305 at verizon.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Larry,
Yes, must be sawn out of there one way or another. The pinblock has a
tongue that's set into a groove in the stretcher. I've done a few with
a hand saw. I suppose you could use a sawzall, or the Bolduc router blade.
Mike
Larry Fisher RPT wrote:
> I have a 1968 C3 in my shop that needs a new pinblock. After pulling
> the plate, I found the pinblock to be securely attached to the rim.
>
> Does this puppy need to be cut out of there with a sawzall?? Any
> experienced people out there on this model??
>
> Larry Fisher RPT
>
>
------------------------------
Message: 4
Date: Thu, 13 Nov 2008 18:39:59 -0500
From: Jon Page <jonpage at comcast.net>
Subject: Re: [pianotech] yamaha C3 pin block removal
To: pianotech at ptg.org
Message-ID: <a0624084ac5426a44f4fb@[192.168.0.184]>
Content-Type: text/plain; charset="us-ascii"; Format="flowed"
>Yes, must be sawn out of there one way or another. The pinblock has a
>tongue that's set into a groove in the stretcher. I've done a few with
>a hand saw. I suppose you could use a sawzall, or the Bolduc router blade.
Or the Fein MultiMaster:
https://www.4multimaster.com/vcc/feinpowertools/multimaster/565787/
I haven't cut out a block yet but I did remove a bass bridge body
from the apron
in short order and very neatly at that. One tool I'm glad I have.
--
Regards,
Jon Page
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20081113/abcb8edc/attachment-0001.html>
------------------------------
Message: 5
Date: Thu, 13 Nov 2008 21:06:10 -0500
From: "Zeno Wood" <zeno.wood at gmail.com>
Subject: [pianotech] lubricants
To: pianotech at ptg.org
Message-ID:
<cee63c600811131806r55ef9196r33fa5cf28c8e64d3 at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
PT = Physical Therapist?
------------------------------
Message: 6
Date: Thu, 13 Nov 2008 20:28:22 -0600
From: Ron Nossaman <rnossaman at cox.net>
Subject: Re: [pianotech] lubricants
To: pianotech at ptg.org
Message-ID: <491CE246.4060006 at cox.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Zeno Wood wrote:
> PT = Physical Therapist?
Peripatetic Traveler = afoot
Ron N
------------------------------
Message: 7
Date: Thu, 13 Nov 2008 21:33:04 -0500
From: "Tom Driscoll" <tomtuner at verizon.net>
Subject: Re: [pianotech] lubricants
To: <pianotech at ptg.org>
Message-ID: <6B23B2CD72AB46BF956B4A58499AC6F1 at pianoshop>
Content-Type: text/plain; format=flowed; charset=iso-8859-1;
reply-type=original
Subject: Re: [pianotech] lubricants
> Zeno Wood wrote:
>> PT = Physical Therapist?
>
> Peripatetic Traveler = afoot
> Ron N
precocious turner
Tom Driscoll
------------------------------
Message: 8
Date: Thu, 13 Nov 2008 19:16:11 -0800 (PST)
From: MICHAEL MEZHINSKY <pghpianotuning at yahoo.com>
Subject: [pianotech] Young Chang brackets
To: pianotech at ptg.org
Message-ID: <294426.1732.qm at web53205.mail.re2.yahoo.com>
Content-Type: text/plain; charset="iso-8859-1"
Hello list,
I need to replace the action brackets on a Young Chang grand piano. I left 3?messages?for Sam Sun at 1-866-798-6979 but did not get a response. Where can I order them? Somebody?wrote about a?good?way?of replacing brackets. Where can I find that method?The link I?tried was?
www.ptg.org/pipermail/pianotech.php/2008-September/227346.html?but?I could not open it.
?
Thanks,
Michael Mezhinsky
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20081113/b0d71de0/attachment-0001.html>
------------------------------
Message: 9
Date: Thu, 13 Nov 2008 21:31:17 -0600
From: Ron Nossaman <rnossaman at cox.net>
Subject: Re: [pianotech] lubricants
To: pianotech at ptg.org
Message-ID: <491CF105.3070703 at cox.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>> Zeno Wood wrote:
>>> PT = Physical Therapist?
>>
>> Peripatetic Traveler = afoot
>> Ron N
>
> precocious turner
> Tom Driscoll
Pernicious Technocrat?
Perspicaciously Tenacious?
Probably Trustworthy?
Ron N?
------------------------------
Message: 10
Date: Thu, 13 Nov 2008 19:39:53 -0800
From: David Andersen <david at davidandersenpianos.com>
Subject: Re: [pianotech] lubricants
To: pianotech at ptg.org
Message-ID:
<1F6DF0F3-9486-44E0-AE99-EBFC223576D7 at davidandersenpianos.com>
Content-Type: text/plain; charset=US-ASCII; format=flowed
Poobah Technocrat?
Persimmon Taster?
Pin Tugger?
David A.?
On Nov 13, 2008, at 7:31 PM, Ron Nossaman wrote:
>
>>> Zeno Wood wrote:
>>>> PT = Physical Therapist?
>>>
>>> Peripatetic Traveler = afoot
>>> Ron N
>> precocious turner
>> Tom Driscoll
>
> Pernicious Technocrat?
>
> Perspicaciously Tenacious?
>
> Probably Trustworthy?
>
> Ron N?
>
------------------------------
_______________________________________________
pianotech mailing list
pianotech at ptg.org
http://ptg.org/mailman/listinfo/pianotech_ptg.org
End of pianotech Digest, Vol 1, Issue 34
****************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20081114/a3586703/attachment-0001.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC