Anyone else have input? Matthew --- On Wed, 10/22/08, Joe And Penny Goss <imatunr at srvinet.com> wrote: From: Joe And Penny Goss <imatunr at srvinet.com> Subject: Re: Jack Flange Repair To: toddpianoworks at att.net, "Pianotech List" <pianotech at ptg.org> Date: Wednesday, October 22, 2008, 11:09 PM Knife saw, chisel Saw sides then chisel middle if it does not break out with pliers.. #335 Joe Goss RPT Mother Goose Tools imatunr at srvinet.com www.mothergoosetools.com ----- Original Message ----- From: Matthew Todd To: pianotech at ptg.org Sent: Wednesday, October 22, 2008 4:43 PM Subject: Jack Flange Repair I will be repairing two jack flanges shortly. They both have the original jack still glued on, but broken. What is the best way to remove the old flange, and glue the new one on. Thanks! TODD PIANO WORKS Matthew Todd, Piano Technician (979) 248-9578 http://w ww.toddpianoworks.com -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20081023/301e941a/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC