Jack Flanges

[Ed Sutton]

When you remove the original flange, there may be a notch under it. Then the replacement flange may fit very well. Is it the proper width for the bird's eye?
es
    ----- Original Message ----- 
    From: Matthew Todd 
    To: pianotech at ptg.org 
    Sent: Friday, October 24, 2008 5:07 PM
    Subject: Jack Flanges



          I attached the pics of the two broken flanges.

          http://farm4.static.flickr.com/3212/2969737097_6e1364464f.jpg

          http://farm4.static.flickr.com/3138/2969736163_b887ba3980.jpg

          I ordered some standard jack flanges from Schaff and they came today.  They do not appear to be the right size.  I put it next to the original flange, and you can see quite a difference.

          Help please.

          These "broken keys" are in the center of the keyboard on my clients piano, so I will be stopping by next week and swapping the whippens from B87 and C88, so at least the piano will be playable until I get this issue resolved.

          Thanks again for your help

          TODD PIANO WORKS 
          Matthew Todd, Piano Technician 
          (979) 248-9578
          http://www.toddpianoworks.com 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20081024/d758fe8d/attachment.html