Steve Brady mentioned using a needle nose type pliers for this... David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: "Joe Goss" <imatunr at srvinet.com> To: pianotech at ptg.org Received: 8/3/2009 2:07:53 PM Subject: Re: [pianotech] after ring on bass damper >Wim and all, >Forgot a trick that sometimes works. Move the open string sideways toward the >damper. Like you would when leveling strings. Be sure you lift the dampers before >pressing the string toward the way you need to improve damping as one can worsen >the situation. >Joe Goss BSMusEd MMusEd RPT >imatunr at srvinet.com >www.mothergoosetools.com > ----- Original Message ----- > From: Laura Read > To: pianotech at ptg.org > Sent: Monday, August 03, 2009 11:14 AM > Subject: Re: [pianotech] after ring on bass damper > Wim, > > I ended up replacing the felts on those dampers I was having trouble with last >month. I don't know why it would help your challenge, but nevertheless I was >pleasantly surprised when it helped mine. > > Laura Read > "Ringing On" > > From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf >Of Paul T Williams > Sent: Monday, August 03, 2009 7:21 AM > To: pianotech at ptg.org > Subject: Re: [pianotech] after ring on bass damper > > Wim, > Are the damper felts crusty or have corrosion on them? Lifting straight up and >down or twisting? Maybe replace the felts. > Paul > > From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf >Of wimblees at aol.com > Sent: Saturday, August 01, 2009 11:04 PM > To: Pianotech at PTG.org; caut at ptg.org > Subject: [pianotech] after ring on bass damper > > I've got a Kohler & Campbell 5'9" grand that has very noticeable after ring on B1 >and C2. At the convention I asked Roger Jolly about it, and he showed me how to >"voice" the damper felt, by sticking a long needle into the felt, first from the front, >and then from the back. He demonstrated this technique on several notes on a >couple of different pianos, and it worked quite well. But yesterday I went to the >piano in question, and tried to do the same thing. I got the damper to work a little >better, but there is still a lot of after ring. > This is not a sympathetic vibration coming from another string. The damper is >properly seated, with plenty of follow through. The actual ring of the string stops, >but there is excessive after ring. It goes away when I put just a little bit of pressure >on the damper head. > I'm open to other suggestions. > Willem (Wim) Blees, RPT > Piano Tuner/Technician > Mililani, Oahu, HI > 808-349-2943 > Author of: > The Business of Piano Tuning > available from Potter Press > www.pianotuning.com >------------------------------------------------------------------------ > avast! Antivirus: Outbound message clean. > Virus Database (VPS): 090801-0, 08/01/2009 > Tested on: 8/2/2009 12:08:05 AM > avast! - copyright (c) 1988-2009 ALWIL Software. >
This PTG archive page provided courtesy of Moy Piano Service, LLC