On Wed, Aug 5, 2009 at 10:46 AM, Joe Goss <imatunr at srvinet.com> wrote: > Yes that is the one. > You have trimmed both the top and bottom of the mute. > As I work the mute right handed only the top ( as it points to the left) is > trimmed. This works for almost all the damper section. There still may be a > few dampers that need to be raised with the pedal or finger so as not to > harm the damping. > Yes, I believe you are correct about how I trimmed it. At any rate, at present it doesn't work well as far as moving it between string sets goes. :-) But since I don't use it for muting much, I haven't tried to fix it. Mostly just use it for inserting a strip mute. -- JF -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090805/72c23cd4/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC