Shim the hammer rest felt David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: wimblees at aol.com To: Pianotech at PTG.org Received: 8/7/2009 8:05:50 PM Subject: [pianotech] blowdistance >I've got a question about blow distance on an upright piano. I just worked on a >Hamilton, and found that the blow distance in the bass was at 1 3/4", but in the >upper treble it was closer to 2". The rail is straight and?resting on the action >brackets (with felt shims). If I?raise the rail so that?the treble is 1 3/4", then bass >will be too close. I've seen that on other pianos in the past, but never that extreme. >Any suggestions? >Willem (Wim) Blees, RPT >Piano Tuner/Technician >Mililani, Oahu, HI >808-349-2943 >Author of: >The Business of Piano Tuning >available from Potter Press >www.pianotuning.com
This PTG archive page provided courtesy of Moy Piano Service, LLC