Chuck, Number One: "1. Sand down to 600 grit and wipe down with acetone. Dye with high quality shoe maker's leather dye, finish with ureathane. (Michael Spreeman)" I do, essentially the same, except I like to finish with Tung Oil, which is a renewable, tough finish. (I use it on my Work Bench.<G>) Reason: I prefer the "feel" of the wood on my fingers. Regards, Joe Joe Garrett, R.P.T. (Oregon) Captain, Tool Police Squares R I -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091216/4bfac72c/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC