I would have sanded the felts. Willem (Wim) Blees, RPT Piano Tuner/Technician 94-505 Kealakaa Str. Mililani, Oahu, HI 96789 808-349-2943 www.Bleespiano.com Author of: The Business of Piano Tuning available from Potter Press www.pianotuning.com -----Original Message----- From: Joe Goss <imatunr at srvinet.com> To: pianotech at ptg.org Sent: Sat, Dec 19, 2009 1:33 pm Subject: [pianotech] Damper leak Hi, Yesterday I serviced a Gulbransen upright with leaky dampers. Spotting plastic damper assemblies, my usual damper bending tools were something that might have caused the 40 plus plastic to break so another method of getting the dampers to seat properly was used. I actually tried two ways and quickly discarded my wire bending pliers as a poor choice in favor of ???????????????? What would you have done? Joe Goss BSMusEd MMusEd RPT imatunr at srvinet.com www.mothergoosetools.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091219/a878b9ef/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC